SURE SEAL Grout, Tile & Stone Sealer – Slow Drying is a low odour sealer. Developed in Australia from advanced technologies and exclusive resins, this slow drying impregnator is specifically designed to seal and protect dense stone surfaces such as porcelain, marble, granite and other polished and unpolished stone surfaces against oil and water-based stains.
KEY FEATURES
SURE SEAL Grout, Tile & Stone Sealer – Slow Drying forms a bond with the surface to provide unparalleled protection against stains, while retaining the natural beauty of the surface. As an invisible impregnator, it will not change the colour, texture or appearance of the surface being treated. It is invisible upon application and leaves no residue on the treated surface.
BENEFITS & CHARACTERISTICS
- Australian made
- Will not alter coefficient of friction
- Slower drying for greater penetration
- Long lasting stain protection
- Resists oil & water-based stains
- Helps prevent mould & mildew
- Resists uv degradation
- Non yellowing
- Dries invisible
- Ideal for stone benchtops
TECHNICAL INFORMATION
When properly applied Sure Seal Grout, Tile & Stone Sealer – Slow Drying will protect both interior and exterior types of tile and masonry surfaces, including, but not limited to, porcelain, granite, marble, sandstone, and terra cotta. Sure Seal Grout, Tile & Stone Sealer – Slow Drying is ideal for stone bench tops. Expected wear is up to between 10 to 15 years on horizontal surfaces and lifetime on vertical surfaces depending on the material, use and maintenance of the surface being protected. Extreme weather conditions, harsh cleaning methods and high-alkaline or solvent-based cleaners will affect the life expectancy of this product.
AEROSOL DIRECTIONS FOR APPLICATION
Surface should be clean, dry and free from any waxes, coatings, grout haze or finishes. Always test product in an incon- spicuous area for suitability. Protect any painted or stained surface adjacent to the application area. Apply one good coat to the polished surface and grout lines by holding can approximately 15-20cm away from desired surface and spray in a sweeping motion. For best results, leave to dry for a minimum of 1 hour, then apply a second coat to the area. Buff treated area before the second coat is dry using a rag or a soft pad. For optimum results, keep the area dry and avoid use for at least 5 hours to allow for curing. Sure Seal® Grout, Tile & Stone Sealer – Slow Drying should only be used in open or well ventilated areas or when a suitable mask is worn.
MAINTENANCE
To clean treated areas, simply use water and mild detergent or any neutral (non-acidic) cleaner. Do not use harsh cleaning agents such as abrasive powders, ammonia, acids, bleach or abrasive scrubbing pads.
COVERAGE & PACKAGING
Seals up to 500 linear metres depending on size of grout joint. Or up to 20 square metres of grout and tile, depending on the material to be sealed and application.
Available individually and in cartons of 12 x 300gm cans. Please contact us for the bulk buy and availability. Request for Quote.
NOTE: Consult the Safety Data Sheet for full technical and safety details. It is recommended to test the product first on a small inconspicuous area to determine its efficacy or unexpected results.
Protect your stone surfaces with SURE SEAL GROUT, TILE & STONE SEALER – SLOW DRYING AEROSOL 300GM. Contact us for bulk purchase and availability. Order now from Sydney Industrial Coatings for free shipping insurance, trade prices, and fast nationwide delivery.
Download Technical Datasheet.
Reviews
There are no reviews yet.