Solutions Sealers Silcopel WB- Water based impregnating sealer

Silcopel-WB is an advanced water-based penetrating sealer designed for porous stone, masonry, and concrete surfaces. This ready-to-use sealer provides an invisible finish while significantly reducing moisture uptake by up to 95%, thanks to its chemical bonding with the substrate’s pores. Ideal for both internal and external applications, Silcopel-WB offers high water repellence and helps reduce efflorescence, spalling, salt damage, and mould growth. Its breathable formula ensures that the surface remains protected without trapping moisture, maintaining the natural appearance of your surfaces.Silcopel-WB also minimizes dusting on concrete surfaces, making cleaning easier and more efficient. With its low VOC content, this sealer is an environmentally friendly option for those looking to protect their surfaces without compromising air quality.

However, It  is not suitable for use on bluestone, granites, or any volcanic stones. Choose Silcopel-WB for superior protection and ease of maintenance for your porous stone, masonry, and concrete surfaces.

Features:

• Water-based breathable penetrating sealer
• Chemically bonds to the substrate
• Invisible finish
• High water repellence
• Reduces efflorescence, spalling, salt damage, and mold growth
• Minimizes dusting on concrete surfaces
• Low VOC content
• Makes cleaning easier
• Not suitable for bluestone, granites, or volcanic stones

Suitable for:

All commercial and domestic facades, walls, and floors. External or internal porous stone, concrete, and masonry products. Sealer can also be used as a pre-seal.

Preparation:

• Always test the product on a small area first and allow a 2-hour cure time to determine the ease of application and suitability of your surface type.
• With new grout, allow 48 hours, and for new concrete, allow 28 days before application.
• All surfaces should be thoroughly cleaned with NATURAL CLEAN. Heavily soiled acid-sensitive surfaces should be cleaned with D-GREASE, while non-acid-sensitive surfaces can be cleaned with D-SCALE. All surfaces should be neutralized with NATURAL CLEAN.
• Allow the surface to dry for approximately 12 to 24 hours before sealing.
• Ensure the surface is clean and free of residue and other contaminants.
• Tape up or protect nearby surfaces, as the sealer will bond to all siliceous materials, such as glass.
• Allow good ventilation and use proper PPE as per details on the SDS.
• Do not thin the product or alter the formula.

Application:

• Apply when the surface temperature is between 5–35 degrees C.
• Use a Solutions Sealers applicator, microfiber, airless sprayer, or paintbrush. Do not use a roller.
• The coats should be enough to wet the whole surface without leaving pools of sealer.
• On porous surfaces, apply 2 coats. The first coat as a flood coat saturating the surface without leaving puddles the following coats applied as a wet on
  wet application.
• Excess sealer can be buffed in with a cloth or, for larger areas, a scrubbing machine with a white nylon pad.
• On a wet-on-wet application, allow up to 15 minutes between coats. Excess should be removed before 15 minutes.
• Do not allow the sealer to contact glass, painted surfaces, plastic, or vinyl.

Coverage:

Porous surfaces: First coat: ~4 square meters per litre, Second coat: 4–6 square meters per litre.

Dense surfaces: 7–12 square meters per litre.

Download and read all the datasheets prior to application.

Visit Solutions Sealer to learn more about this product.

Contact Sydney Industrial Coatings for any inquiries.