Sikafloor®-215 Rapid Screed – a premium screed that is easy to apply with good working time, but also reaches a high strength with low moisture within 24hrs.
Australia Wide Shipping
Australia Wide Shipping
USES
Sikafloor®-215 Rapid Screed is applied in combination with suitable materials from Sikafloor®, SikaBond®, Sikadur®, SikaTite® & Davco® ranges
Applications are as follows
> Internal & external space
> Bonded screed from 10mm – 60mm
> Un-bonded screed from 30mm – 80mm
CHARACTERISTICS AND ADVANTAGES
▪ Pre-mixed binder with selected aggregates
▪ High strength – ~40MPa after 28 days
▪ Good working time 20-30min @ 23°C
▪ Low shrinkage
▪ Tiles may be installed after 15hrs
▪ Suitable for all residential or commercial flooring installation
Grey powder with aggregates
20kg Bag – 48 bags per pallet
1.9 – 2.1 Litres of clean, cool water
5°C – 35°C
20 – 30 minutes @ 23°C
Allow 15 hours at 23°C prior to the application of tile or levelling systems. Allow 3 days at 23°C for impervious floor coverings or membranes.
Drying is dependent on thickness of application, temperature, air flow & relative humidity. Increased air flow will help with drying speeds in cooler temperatures.
https://aus.sika.com/en/construction/flooring/cement-levellingsystems/sikafloor-215-rapidscreed.html
Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.
Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.
Reviews
There are no reviews yet.