Sikafloor 161 – 17Kg 100% Solids Epoxy Primer Kit

$425.00 inc GST

Kit Size 17Kg or 12.2 Litres | Coverage 60sqm if using 11mm Nap Roller

This calculator should only be used as a guide. Product consumption will vary depending on application style and the porosity of the surface.
Project length in meters	Project width in meters
Project size 0.00 m²
L consumption rate/sqm 5	Number of coats
Add 1L for wastage allowance
Amount required 0.00 Litres
Product quantity required 12.2 drum(s) 425.00

Sikafloor®-161 is an economic, two part, low viscosity epoxy resin.”

NOTE: Sikafloor 161 is Sika’s Sikafloor264 Product without pigment packs.

Low viscosity
Good penetration
Excellent bond strength

Usage

For priming concrete substrates, cement screeds and epoxy mortars
For low to medium absorbent substrates
Primer for the Sikafloor®-MultiDur and Sikafloor®- MultiFlex flooring systems
Binder for levelling mortars and mortar screeds

Advantages

Low viscosity
Good penetration
Excellent bond strength
Can be accellerated using Sikafloor Booster
Can be used on substrates with an elevated moisture content <6%pbw
Multi-purpose

Reviews

There are no reviews yet.

Be the first to review “Sikafloor 161 – 17Kg 100% Solids Epoxy Primer Kit”

Part A	13.09 kg containers
Part B	4.0 kg containers
Part A+B	17.09 kg ready to mix units

Mixing ratio

Part A : part B = 77 : 23 (by weight) – 2.1 : 1 (by volume)

Ambient air temperature

+10 °C min. / +30 °C max.

Relative air humidity

80 % r.h. max.

Dew point

Beware of condensation!
The substrate and uncured floor must be at least 3 °C above dew point to reduce the risk of condensation or blooming on the floor finish.

Note: Low temperatures and high humidity conditions increase the probability of blooming.

Substrate temperature

+10°C min. / +30°C max.

Substrate moisture content

Maximum 6 % moisture content using the Sika® – Tramex meter (at the time of application).
Please note that the moisture content must be < 6 % pbw when using the CM measurement or Oven-dry-method.

No rising moisture according to ASTM (Polyethylene-sheet).

Pot Life

Temperature	Time
+10 °C	~ 50 minutes
+20 °C	~ 25 minutes
+30 °C	~ 15 minutes

Curing time

Before applying solvent free products on Sikafloor®-161 allow:

Substrate temperature	Minimum	Maximum
+10 °C	24 hours	4 days
+20 °C	12 hours	2 days
+30 °C	8 hours	24 hours

Before applying solvent containing products on Sikafloor®-161 allow:

Substrate temperature	Minimum	Maximum
+10 °C	36 hours	6 days
+20 °C	24 hours	4 days
+30 °C	16 hours	2 days

Times are approximate and will be affected by changing ambient conditions particularly temperature and relative humidity.

Consumption

Coating System	Product	Consumption
Priming	1–2 x Sikafloor®-161	1–2 × 0.35–0.55 kg/m²
Levelling mortar fine (surface roughness < 1 mm)	1 pbw Sikafloor®-161 + 0.5 pbw quartz sand (0.1–0.3 mm)	1.7 kg/m²/mm
Levelling mortar medium (surface roughness up to 2 mm)	1 pbw Sikafloor®-161 + 1 pbw quartz sand (0.1–0.3 mm)	1.9 kg/m²/mm)
Intermediate layer (self-smoothing 1.5 to 3 mm)	1 pbw Sikafloor®-161 + 1 pbw quartz sand (0.1–0.3 mm)	1.9 kg/m²/mm
	+ optional broadcast quartz sand 0.4–0.7 mm	~ 4.0 kg/m²
Bonding bridge	1–2 × Sikafloor®-161	1–2 × 0.3–0.5 kg/m²
Epoxy screed (15–20 mm layer thickness ) / Repair Mortar	1 pbw Sikafloor®-161 + 8 pbw quartz sand	2.2 kg/m²/mm

Note: These figures are theoretical and do not allow for any additional material required due to surface porosity, surface profile, variations in level or wastage etc.

PDS | SDS Part A | SDS Part B

Sika

Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.

Sikafloor 161 – 17Kg 100% Solids Epoxy Primer Kit

0.00 m²