Nutech PaveCoat AntiSlip (Mix-In) – 400g

Ensure optimal safety on freshly paved surfaces with NuTech PaveCoat AntiSlip Mix-In. Specifically developed to enhance the friction coefficient of all NuTech single pack floor coating systems, this mix-in additive significantly reduces slip potential in wet and dry conditions.

Key Features:

• Substantially improves safety on sealed surfaces under varying conditions.
• Simple mixing for uniform distribution.
• Flexible, scuff-resistant, and less abrasive surface to mitigate personal injury risks.
• Achieves Pendulum Classification of P2 or P3, meeting AS4586 & AS4663 standards.

Important Information:

• Not suitable for inclined or steep surfaces.
• Not recommended for use in 2 pack concrete finishing systems, AquaStop, or Silicon Sealer.
• NuTech recommends PolyCryl and AntiSlip Cast On for up to an R12 or P5 slip rating.

Application Guide:

• Conduct a test patch to account for varying surface profiles, slopes, and access conditions affecting safety.

Application Procedure:

• Apply the first coat of the selected NuTech sealer, allowing it to dry. AntiSlip Mix In is required only in the final topcoat.
• Mix the selected NuTech Paint system according to TDS. Add AntiSlip Mix In in specified ratios, stir well, and apply as directed.
• ReCoat: Add and apply AntiSlip Mix In in the final coat only. Refer to specific NuTech system TDS for re-coat times.

Ideal for:

• Wet areas, pools, factory loading docks, access ramps (with less than 15 degrees incline), stairs, entrance foyers, and public pedestrian and vehicle areas.