Solutions Sealers Mould Terminator- Mould, Algae, Moss and Mildew Remover

Mould Terminator is a highly effective solution for removing and preventing the growth of mould, algae, moss, and mildew for up to 2 years. Suitable for both indoor and outdoor use, this powerful product delivers fast results, tackling stains, odours, and soiling immediately.

With its residual effect, Mould Terminator helps to prevent mould from returning, ensuring long-lasting cleanliness and protection. This versatile product is a powerful sanitizer and odour remover, making it an essential for maintaining a healthy environment.

Australian-made and owned, Mould Terminator guarantees quality and reliability for your mould removal needs.

Features:

• Removes mould, algae, moss, mildew, and green slime
• Residual effect prevents mould from coming back
• Suitable for indoor and outdoor use
• Fast-acting with immediate results
• Eliminates stains, odours, and soiling
• Powerful sanitizer and odour remover
• Australian-made and owned

Suitable For

Mould Terminator is suitable for all stone and masonry surfaces on walls and floors.

Preparation

• Always test the product on a small area first to determine the ease of application and surface compatibility. Some surfaces may be sensitive to certain chemicals.
• Important: When using a sprayer to apply Mould Terminator, wear a suitable respirator or face mask. Avoid spraying or misting in areas with poor ventilation.
• Remove dust, dirt, or debris by blowing, brooming, or vacuuming the surface.
• Work away from direct sunlight in a cool, shaded area.
• Mould Terminator is ready to use. Do not dilute.

Application

• Apply to the surface using a sprayer, watering can, or by pouring directly onto the surface. Spread the product liberally for even coverage with a soft-bristled broom or window washer.
• For stubborn stains, scrubbing with a stiff-bristled broom or machine may be required.
• For hard-to-clean surfaces, high-pressure cleaning or hosing the area 10 minutes after application may be necessary to remove dirt and grime.
• Lightly apply a final coat to a dry surface. Leaving the product on the cleaned surface will provide residual mould prevention.

Note: On walls or steep driveways, an additional application may be needed due to rapid runoff or staining.

Coverage

Coverage depends on the surface texture, porosity, and application method:

• Rough and porous surfaces (e.g., concrete, sandstone): ~5 m² per litre.
• Medium porosity stone (e.g., granite, limestone): ~12 m² per litre.
• Dense, polished, or non-porous surfaces: ~30 m² per litre.

Download and read all the datasheets prior to application.

Visit Solutions Sealer to learn more about this product.

Contact Sydney Industrial Coatings for any inquiries.