Solutions Sealers Infuse- Impregnating Colour Enhancing Sealer

Solutions Sealers Infuse is a premium long-life impregnating colour enhancer that not only brings out the natural beauty of your stone and concrete surfaces but also provides superior water and stain repellency. This solvent-based sealer chemically bonds to the substrate, ensuring lasting protection and enhanced appearance. With Infuse, enjoy excellent colour enhancement that revitalizes the look of your surfaces. Its advanced formula makes cleaning easier, keeping your stone and concrete surfaces looking pristine with minimal effort. Additionally, when applied correctly, Infuse will not alter the slip rating of your surfaces, maintaining their safety and functionality.

Choose Infuse for a powerful combination of colour enhancement, water repellency, and stain protection, ensuring your surfaces stay vibrant and protected for the long term.

Features:

• Excellent colour enhancement
• Provides water repellency and stain protection
• Solvent-based impregnating sealer
• Chemically bonds to the substrate
• Eases cleaning of stone and concrete surfaces
• Maintains slip rating if applied correctly

Application:

• Use a lambswool applicator, airless sprayer (Or soft white cotton cloth for finer pored surfaces). Tape up and prepare area to be sealed. Confirm test area & product is suitable .
• Apply when surface temp is between approx. 5°- 35° C.
• Allow good ventilation and adequate air flow. Use proper PPE as per details on Safety Data Sheet.
• Apply sealer slowly with a cross direction for complete coverage.
• Avoid puddling the sealer and remove any excess INFUSE after 10 – 15mins from initial application. Allow 15 – 30mins between coats. Keep surface dry and free from traffic for 2-4 hours.
• On finer surfaces like Marble and Travertine etc: polish sealer into surface and removing excess as you go.
• Do not pour sealer directly on the surface nor allow puddling.
• The amount of coats will depend on the look required and the porosity of the surface being sealed. Generally we suggest 1 – 2 coats on an average porosity masonry surface.

CAUTION:

On initial application, surface may be slippery for the first 24 – 36 hours. After this time a quick wash with NATURAL CLEAN scrubbing with a soft bristle broom or Polyvac with a soft pad. Check machine suitability on your surface type.

Visit Solutions Sealer to learn more about this product.

Contact Sydney Industrial Coatings for any inquiries.