Australia Wide Shipping
Australia Wide Shipping
Solid colour painted floors are an economical floor covering solution for retail spaces, the finish is subtle, safe to walk on and easy to keep clean and maintain. This type of flooring is created by applying two generous coats of coloured epoxy resin products. The colored epoxy can be customized to match your brand or product offerings, and it provides a uniform and seamless appearance.
Solid color epoxy flooring is an economical option for high-traffic areas as it provides a durable and long-lasting surface that can withstand heavy foot traffic and abrasions. The epoxy coating is also resistant to stains and chemicals, making it easy to clean and maintain.
In addition to its durability, solid color epoxy flooring is available in a wide range of colors and finishes, allowing you to create a custom look that complements your brand and product offerings. The finish can range from high-gloss to matte, depending on your preference or the aesthetic of your space and can have the anti-slip increased to ensure safety your premises.
When choosing a solid color epoxy flooring option for your showroom or retail space, consider the color and finish that will best enhance the appearance of your products and brand. It’s best to work with a professional flooring contractor who can help you choose the right type of epoxy coating and ensure that the surface is properly prepared before application. This will help to ensure that the finished product is durable, attractive, and long-lasting.
Showing all 6 results
To achieve a successful floor coating system make sure your surface is free of dust, oil/grease, any loose particles or paint and moisture. Click on the options below for further information
Epoxy Flooring Tools Information
Epoxy Floor Coating Preparation
Floor Grinders: Rubicon 480mm Grinder | Husqvarna 450mm Grinder | Scintex 250mm Grinder
Vacuums & Dust Extractors: Floorex | Husqvarna S36 (3 motor phase) | Husvarna S13 (single phase)
Diamond Grinding Plugs: Rectangle | Arrow | PCD (to remove previously coated or adhesives on the floor)
Redi-Lock Diamond Plugs: Sydney Industrial Coatings (9 pack)
Diamond Grinding Cup Wheels: 125mm to 250mm
Fill in all your cracks using a 2-pack epoxy filler and wait until the patching mortar is fully cured before grinding or coating the floor, this process usually takes a minimum of 6 – 8 hours.
For larger cracks and spalls: SIC Epoxy Coving & Repair Kit | Sika Sikadur 31 CFN
For smaller patching and cracks: Sika Sikadur 33 | Sikadur 513 (magic powder mixed into epoxy to thicken up)
General curing time (at 20°C) is a minimum of 8 hours. This can vary further if solvent has been added to the epoxy.
Sika Australia: Sikafloor 160 (up to 40sqm) | Sikafloor 94 (recommended) | Sikafloor 158W (moisture barrier)
UltraKote: High Solids Epoxy
Elite Crete Systems: E100-VB5 Epoxy Vapor Barrier
EpiMax: Epimax 237WB (water based)
This is an important step for if the coating is left uneven, this will show though your final coat. If this step if not completed within 30 – 36 hours (depending on temperature) of applying the previous coat, the floor will need to be scratched using an 80 grit sand paper.
General curing time (at 20°C) is minimum 8 hours.
High Solids Epoxies: UltraKote High Solids Epoxy
100% Solids Epoxies: Sikafloor 264 | Elite Crete Systems PT4 (pretinted)
UV Stable Polyurethanes: Sikafloor 359 AU | EpiMax 920
UV Stable Polyaspartic: EpiMax 842
Using thinners in the final (or finish) coat is not recommended. It is always recommended to back roll the product against the natural light to assist with achieving a more uniform finish. Wearing spike shoes to walk over the epoxy can help ensure the product is applied evenly, however you must apply safety practices and be cautious of injury.
Antislip media can be added to the topcoat to achieve a higher slip rating
Your floor will be trafficable after 24-48 hours and heavy items such as cars, boats or trailers shouldn’t be parked on the floor for 7 days after application of the final coat
