EpiMax 220 Type 2 High Build Glaze Coat is a solventless, high gloss, low viscosity epoxy system designed for application as a clear hard wearing coating primarily over polished, stained concrete or vinyl flake flooring. The system benefits from the new technology including low inherent colour chemistry and stabilizers. As a result, EpiMax 220 Type 2 is generally suitable for behind-glass floor protection applications. Since the system is solventless, high film builds can be achieved in two applications.
Advantages
- Low viscosity
- Mild odour, light colour
- Easy application by roller or squeegee
- Good adhesion
- Minimal sweat-out, blush or bloom
- Excellent surface wetting characteristics
- Good mar resistance
- Resistant to mild acids/alkalies
- High density cure development
Typical applications
- Seamless performance glaze coats
- High build sealing of vinyl flake flooring
- Enhancement & protection of polished concrete
Typical properties
- Work time: 20 mins
- Foot traffic: 24 hours at 25ºC
- Hardness (Shore D): 55
- Full service: 7 days at 25ºC
- Flexural strength: 55 MPa
- Compressive strength: 50 MPa
Estimating data
12L EpiMax 220 Type 2 = 36sqm (2 x 160 micron dft)
EpiMax 220 Type 2 is available in 12 litre packs. It is pre-packed in correct proportions for use.
Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.
Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.
Reviews
There are no reviews yet.