Australia Wide Shipping
Sikagard®-552 W Aquaprimer is a one-component water dispersed adhesion promoting primer for water dispersed polymer paint coatings. Sikagard®-552 W Aquaprimer is part of a system that complies with the requirements of EN 1504-2 as a protective coating.
USES
Priming coat for concrete and dense mineral substrates like fibre cement, aerated concrete, gypsum and thin rendering such as Sika® MonoTop®-723 N, Monotop FC, etc. Sikagard®-552 W Aquaprimer can also be used as a primer on firmly adhering existing water based coatings or under cement resurfacing mortar to improve the adhesion in case of concrete surface treated with hydrophobic impregnation. Sikagard®-552 W Aquaprimer is part of a system:
CHARACTERISTICS AND ADVANTAGES
Milky white liquid
15 litre pail
Sikagard®-552 W Aquaprimer is supplied ready for use; do not dilute it. Shake it thoroughly prior to apply it.
Sikagard®-552 W Aquaprimer can be applied by brush, roller or airless spray.
Clean all tools and application equipment with clean water immediately after use. Hardened / cured material can only be removed mechanically.
Safety Data Sheet (SDS) | Product Data Sheet (PDS)
https://aus.sika.com/en/construction/concrete-repair-protection/corrosion-management/corrosion-inhibitors/sikagard-552-w-aquaprimer.html
Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.
Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.
Reviews
There are no reviews yet.