Eco Screed Rapid Concentrate is a rapid setting screed binder for mixing with graded sand aggregates. Formulated for rapid setting times for a variety of rapid setting screed applications.
Australia Wide Shipping
Australia Wide Shipping
$70.00 inc GST
A rapid setting screed binder for cement based screeds & mortar beds.
Eco Screed Rapid Concentrate is a rapid setting screed binder for mixing with graded sand aggregates. Formulated for rapid setting times for a variety of rapid setting screed applications.
USES
Eco Screed Rapid Concentrate is suitable for rapid drying screeds and mortar beds ready for foot traffic after 3-4 hours & ready for tiling installation after 6-8 hours. Eco Screed Rapid Concentrate improves compressive strength and flexural strength when compared to typical sand & cement screeds Eco Screed Rapid Concentrate is suitable for both internal and external use.
CHARACTERISTICS AND ADVANTAGES
20 Kg Bags
Eco Screed Rapid Concentrate shall be mixed with graded sand aggregate from 0.8mm to 4mm thick.
MIx 20kg Eco Screed Rapid concentrate with 60, 80, or 100kg of graded sand with 9.2 – 11.2 Litres of clean cool water. Mix for 3 minutes to a semi dry homogeneous mix and use immediately.
Bonded Screeds:
Prior to placement of screed mix a slurry bond coat consisting of 1part Eco Screed Rapid with 1 part EcoCrete admix to 2 Parts water.
Apply the bond coat with a broom or trowel to the substrate to a minimum depth of 2mm. Prior to the bond coat skinng, place and level the screed mix. Level and shape the falls as required.
Minimum depth: 10mm
Maximum depth 100mm
Unbonded Screeds
Lay 2 layers of polyethylene film on the substrate and tape the joins.
Place the mixed screed onto the polyethelene film and reinforce with galvanised wire as per applicable standards.
Level and shape to falls as required.
Minimum depth: 30mm
Maximum depth 100m
Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.
Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.
Reviews
There are no reviews yet.