Australia Wide Shipping

Sydney Industrial Coatings Logo

Australia Wide Shipping

sika primer 3N is a transparent primer for porous surfaces available in sydney industrial coatingssika primer 3N is a transparent primer for porous surfaces available in sydney industrial coatings

Sika primer 3N

$65.00 – $140.00 inc GST

one component, transparent primer for porous surfaces and meta

Clear
Quantity
SKU: B621CA Categories: , Tags: , , , ,

Sika Primer-3N is a solvent-based, one-component primer designed to enhance the adhesion of Sikaflex, SikaHyflex, SikaBond, and Sikasil products on porous substrates like concrete and metals.

Advantages

  • Easy to apply
  • Water repellent
  • Short flash-off time

Application Guidelines

  • Substrate Preparation Ensure the substrate is clean, dry, sound, and homogeneous, free from oils, grease, dust, and loose or friable particles. Remove cement laitance.
  • Application Method Apply Sika Primer-3 N with a clean brush or roller. Apply only once and reseal the container immediately after each use.
  • Cleaning of Equipment Clean all tools and application equipment immediately after use. Once cured, residual material can only be removed mechanically.

Consumption:

  • On Porous Substrates Approximately 5 m² per liter.
  • On Non-Porous Substrates Approximately 8 m² per liter.

Before applying sika primer , make sure to review the full product details, application instructions, and safety guidelines. Click below to download the datasheet and ensure optimal results.

Sika primer 3N-sika’s website

Contact Sydney Industrial Coatings for any enquiries.

Reviews

There are no reviews yet.

Be the first to review “Sika primer 3N”

Your email address will not be published. Required fields are marked *

Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.

You may also like…

Related products

Google Rating
5.0
Based on 89 reviews
×
js_loader